Site hosted by Angelfire.com: Build your free website today!

There are a number of ways of knowing if such pipes are present. There are a number of issues to consider before conversion.
. This is due to the ease of conversion. All you have to do is drill holes on the door and mount your beer shanks and trays on the door. A lot more work needs to be done such devices.

When using small sized refrigerators or freezers, you need to be sure that they will be able to accommodate the keg. Should you make a mistake and drill into one of those pipes then your dream would be a flop even before you start. In the case of a freezer based kegerator, it is necessary to modify the temperature controller. It is also important to ensure that the bottom is flat. This is very important. It may be necessary to build a false bottom into the device to prevent China Twill Fabric the kegs from falling every time the door is opened.

The most common refrigerators for kegerator conversion are the stand up refrigerator and the waist high freezer. Before conversion of a refrigerator into a kegerator, it is advisable that you first list your needs and wants. The keg is kept under refrigerated conditions to keep it chilled. This is a sure sign of their presence. The process of conversion shall also be affected by your intended purpose. However if you are still in doubt it is best to confirm.For those who are not in the know a kegerator is a beer dispensing device. This you will do by removing the inner lining panel. You will have to ensure that adequate space is available for smooth conversion of the refrigerator. Observe the door and see if there are pipes running into the door. If not, it may be necessary to call in an electronics expert. Also observe the door hinges to see if they are unnecessarily bulky.

If your wish to have a kegerator with a bigger capacity, it is necessary to use a large storage freezer. It would be a disaster for example if you bought a fridge or freezer intending to convert it only to find out that it cannot accommodate your keg. This is the case where the kegerator has at least four taps. It will be necessary to install draft towers as this will provide extra room for cold storage and lagering of beers. Do you intend to have it for beer storage only? How many beers shall you serve at a time?

The most likely candidates for conversion are the stand up refrigerators. If you observe carefully the above cited issues, you will be the proud owner of a fully functioning kegerator. Before you commence the drilling process, ensure that refrigerant lines are not mounted on the doors. One of these considerations is space. This requires some expertise in electronics. What exactly do you expect from this device? After determining your needs and objectives, you may now go shopping around for an acceptable vessel. It is therefore necessary that you do accurate measurements to ensure that the refrigerator or the freezer is big enough to accommodate the keg. You may do it yourself if you have some level of proficiency. The beer may remain fresh for many months to come despite refrigeration for extended periods